Discoloured Shutters? 4 Actionable Steps To Recreate New-Looking Timber Plantation Shutters

Timber plantation shutters deliver aesthetic prowess and functional practicality for any room in your home, but over a period they can begin to look timeworn and discoloured. Applying timber stain is an excellent way to refresh the look of your shutters, while serving as a protective coating for the timber. These actionable steps will help you recreate new-looking timber plantation shutters with stain.

Clean The Plantation Shutters For Enhanced Stain Absorption

You will need to open up the shutters to tackle every part of the surface effectively. If possible, keep the windows open to work in a well-ventilated environment. Begin by cleaning the timber plantation shutters to ensure that the stain absorbs into the timber surface more efficiently. Use masking tape to cover the grooves between the wall and timber frame to protect the walls from getting dirty with the stain. Dip a lint-free cloth in warm detergent-filled soap water and scrub away the grime and dirt. You simply need to fill a spray bottle with water and a few drops of detergent until foam forms inside.

Lightly Sand The Timber Plantation Shutters

Lightly sand your timber plantation shutters with medium sandpaper because this action will allow the timber stain to hold better on the surface. Medium sandpaper is ideal because it will not cause scrapes or scratches and will give you just the right amount of coarseness.

Use A Paint Brush To Stain The Shutters

You will find it easy to buy timber stain from your nearest home improvement or hardware store. Stains are typically available in a variety of finishes, so you an choose something that resonates with your existing interior décor. Before applying the stain, mix it well with the paintbrush. Begin at the top corners and work your way to the bottom. This will ensure a non-streaky and neat finish. Avoid starting from the bottom because dripping stain from the top corners will fall over the already-stained bottom areas.

Let The Stain Dry Before Operating Your Timber Plantation Shutters

Timber stain typically takes a few hours to dry, but you must follow the recommendations suggested by the manufacturer for optimum drying time. Ideally, you should work on the timber plantation shutters on a sunny day in a ventilated room to ensure minimal drying time. Once you're satisfied that the timber stain is dry, you can operate your shutters once again.

You're now left with new-looking shutters that elevate the look of your room. Follow these easy and actionable steps when adding stain to your home's timber plantation shutters.

Share